מצלמות וידאו מקצועיות
Canon ME20F-SH
מפרטיםמפרטים מפורטים
Camera
- Sensor
35mm Full Size CMOS Sensor
- Filter
RGB Primary Colour Filter (Bayer array)
- Effective pixels per sensor
Approx. 2.26MP (2000 x 1128)
- Minimum illumination
0.0005 lux or less( Gain 75dB, f/1.2, 29.97P, 50 IRE)
- Horizontal Resolution
Depends on the lens used.
- Lens Mount
Canon EF mount with Cinema Lock
- ND filter
Yes, 2 density (1/8, 3 stops or 1/64 , 6 stops) Manually selected electronic control
- Focus control
Manual Focus using lens or via RC-V100 Remote Control; One Shot AF via assignable button
- Iris control
Manual; 1/2 stop increments. Push Auto Iris via assignable button. Auto (combined function combining Iris, Gain, Shutter and ND filter operation)
- Aperture range
Depending on selected lens
- Filter diameter
Depending on selected lens
- Image stabilization system
Depending on selected lens
- Digital Tele Converter
Yes : X2/ X4 tele converter
- Type
DIGIC DV 4
- Sampling accuracy
YbCbCr 422 via 3G/HD-SDI; RGB 444, YCbCr 444, YCbCr 422 via HDMI
- Bit depth
10 bit (8 bit effective)
Recording
- Video storage media
External Recording Device
- Recording file format
Depending on External Device
- Recording frame rate
3G/HD-SDI Output: 1920x1080: 59.94P/59.94i/50P/50i/29.97P/25P/23.98P
1280x720: 59.94P/50P/29.97P/25P/23.98P
HDMI Output: 1920x 1080: 59.94P/59.94i/50P/50i/29.97PsF/25PsF
1280x720: 59.94P/50P
640x480: 59.94P
- Slow/Fast motion
No
- Interval Record
No
- Frame Record
No
- Pre Record (cache record)
No
- Scan Reverse
No
- Custom Picture Options
Nine Custom Picture options: Canon Log, Wide DR, EOS Standard, CP1 - CP6 . User customisable settings: Black, Black Gamma, Knee, Sharpness, Noise Reduction, White Balance. Adjustable for Chroma Key performance¹
- HD->SD conversion
No
System
- Automatic Exposure Settings
Shutter Priority, Aperture Priority, Auto Gain Control (AGC)¹
- Audio in
3.5mm stereo mini jack, plug-in power mic supported
- Headphone output
No
- Video monitor output
Yes, 3G/HD-SDI (BNC) OSD output compatible, HDMI.
- HDMI
Yes. Output only,
- USB
No
- 3G/HD-SDI output
Yes, X2; Output 1 OSD compatible, Output 2 Clean output only.
- Time code
No
- Genlock
Yes, input only, BNC
- Component out
No
- AV terminal
No
- DC input
Yes. 4-Pin XLR, 2-Pin connection. Input voltage 11 - 17V
- Lens Terminal
Yes, 12-pin connector¹
- Remote Control Terminal
Yes, x2: Remote A: 2.5mm mini jack/Remote B: Circular 8-pin . Both utilise Canon Unique Protocol.
- Memory Card connector
Yes, microSD card (for firmware update only, no recording capability)
- Colour Bars
Yes, SMPTE, EBU and ARIB depending on system frequency
- Tally lamp
No
- Custom key
No
- User Assigned Functions
Yes, 4 buttons.
Assignable items:One-Shot AF / Push Auto Iris / ABB /AE Shift + / AE Shift - / Bar / Set WB /Tele-converter / Infrared / External Rec / Custom Picture /
Camera Mode A/M. These items work with the RC-V100 remote controller.
- Custom Dial
No
Shooting functions
- Exposure metering
Backlight, Standard, Spotlight
- Exposure compensation
Yes: ±2.0, ±1.75, ±1.50, ±1.25, ±1.0,±0.75, ±0.50, ±0.25 or ±0
- Exposure Lock
No
- Auto Gain Control setting
Yes , OFF (75dB) or value from 36dB to 75 dB (in 3 dB increments)
- ISO Sensitivity
Maximum in excess of ISO 4,000,000 equivalent at -75dB
- Dynamic Range
Canon Log/Wide DR mode: 800%/12 stops at +9.0dB (Approx. ISO2300)
- Gain setting
0dB to -75dB in 3dB intervals.
- Control Modes
Manual 1/4 stop increments, Auto (combined function combining Iris, Gain, Shutter and ND filter operation)
- Shutter speed
1/3 sec - 1/2000 sec depending on recording mode and system frequency
- Shutter Angle
No
- Slow Shutter (SLS)
No
- Scan Reverse
Yes
- Clear Scan
No
- Infrared shooting mode
Yes: IR Cut-out filter, electrically operated.
- Built-in IR lamp
No
- Auto
YES
- Preset
Daylight/Tungsten
- Shockless WB
Yes, via Custom Function Menu
- Manual setting
Set A, Set B (Default 5,500K)Kelvin ( 2000K - 15000K)
- Countup system
No
- Start value setting
No
- Recording
Linear PCM 48 kHz 16-bit digital conversion, 2 channels
Accessories
- Supplied
2-pin Power Connector
- Optional
RC-V100 remote Control Unit, Tripod Adapter RB-1, RS-422 8-pin remote cables RR-10 (10m)/ RR-100 (100m)
AC-E19 Compact Power Adapter
- Operating Voltage
DC: 11 - 17V via 4-pin XLR or 2pin connector
- Power Consumption
Approx 12W (Body Only),
Miscellaneous
- Dimensions
102mm x 116mm x 113mm (W xH x D) 4.0 x 4.6 x 4.4 inches
- Weight (camera only)
Approx. 1.1 kg (2.4 lbs)
- Operating Temperature range
Approx. 0 to 40°C, 85% (relative humidity), Approx. -5 to 45°C, 60% (relative humidity)
All specifications are subject to change without notice
All specifications are subject to change without notice
-
¹ Connector activation may require firmware update
-
¹ Firmware upgrades may be required to enable all camera features. Visit the Canon Support website for more information, or contact your local Canon representative.
-
¹ Firmware upgrades may be required to enable all camera features. Visit the Canon Support website for more information, or contact your local Canon representative.
-
¹ Connector activation may require firmware update
-
¹ Firmware upgrades may be required to enable all camera features. Visit the Canon Support website for more information, or contact your local Canon representative.
-
¹ Firmware upgrades may be required to enable all camera features. Visit the Canon Support website for more information, or contact your local Canon representative.